SEKURE SX-3100LCD Manual do Operador Página 334

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 378
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 333
322 GAS ANALYZER
6. Install program card.
The software that operates the Gas Analyzer, as well as all of the Tester features, is
contained in the program card. With the Tester powered off, insert the program card
into the program card slot of your tester.
7. Connect the PXA-1000 to the Tester using the I/P cable.
The Tester controls the PXA-1000 by communicating through the I/P cable. Connect
one end of the I/P cable to the Tester’s I/P port and the other end to the analyzer’s I/P
port.
8. Connect the DLC cable.
Refer to the appropriate chapter (OBD, OBD-II) for instructions on connecting the
Tester DLC cable to a vehicle.
9. Turn on the Tester.
The Tester is now ready to control the Gas Analyzer. By pressing the O key, the
Tester will display the power-up screen. See Section 5.0: Gas Analysis Mode for Gas
Analyzer operation.
GAS ANALYZER
POWER CABLE
PXA-1000
POWER CABLE
CIGARETTE
LIGHTER
ADAPTER
TESTER
FIGURE 6. Connecting the PXA-1000 to the Tester Using the I/P Cable
Vista de página 333
1 2 ... 329 330 331 332 333 334 335 336 337 338 339 ... 377 378

Comentários a estes Manuais

Sem comentários