SEKURE SX-3100LCD Manual do Operador descarregar pdf (Página 238)

226 BREAK-OUT BOX

4.0 CUSTOM DATA MODE

Press 2 from the <BREAK-OUT BOX MENU> to select the <CUSTOM DATA> mode.

Use the arrow keys and y and n keys to select a custom list of signals. The cursor

position is shown by a flashing reverse video box on the first character of the signal name.

Selected signals are highlighted. Up and Down arrows appear on the right if more signals

can be displayed (if there are more than 56 signals). Selected signals are displayed in the

order they are selected. Press e to terminate signal selection and proceed to the

<DATA LIST> mode. All Data List functions are available for Custom Data displays.

“T:2” in the upper right screen indicates the number of timing signals that can be selected.

ACTIVE KEYS

u d Move the cursor (highlight) up and down.

l r Move the cursor (highlight) left or right.

y Select a signal.

n Deselect a previously selected signal.

e Go to Data List Display.

GROUND CHECK

During initialization of the BOB functions, the Tester checks to see if the BOB is correctly

connected to the vehicle. If the Tester detects a possible connection problem, this screen is

displayed. Please check the following:

• ECU Connectors are improperly connected or damaged.

• BOB harness connectors are improperly connected.

• The vehicle battery is completely discharged.

The datalist display indicates the ground signal which may be open.

NOTE

Maximum of six timing signals can be displayed at once. The

counter in the upper right corner of the display indicates the

number of available timing signals remaining.

HINT

If abnormal signal values are displayed in <DATA LIST> or

<CUSTOM DATA> mode, use the <OSCILLOSCOPE> mode

to confirm the signal values before replacing any parts.

1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 377 378

Sem comentários

SEKURE SX-3100LCD Manual do Operador Página 238