SEKURE DGP2-648 Manual do Utilizador

48-Zone LED KeypadUser ManualDGP2-648

8 User’s ManualIn Area Status Display, the following will illuminate for the areaselected:• The area lights (A1, A2, A3, and A4) if the associated are

Digiplex 848/DigiplexNE LED Keypads 9n5.0 ARMINGWhen the system is armed, it will respond to any breach in the zonesaccording to the way each zone is

10 User’s Manual5.3 STAY ARMINGStay Arming will partially arm your system to permit you to remain inthe protected area. For example, you can arm your

Digiplex 848/DigiplexNE LED Keypads 11n5.5 FORCE ARMINGForce Arming allows you to arm your system when specific zones areopen. Your installer can prog

12 User’s ManualYou may use the One-Touch keys (see section 5.6) or akeyswitch (see section 5.7) to arm the area. Ask yourinstaller for details. 5.6 O

Digiplex 848/DigiplexNE LED Keypads 13n5.7.2 MOMENTARY KEYSWITCHTo arm the system, place it in the “ON” position briefly then place itback in the “OFF

14 User’s ManualIf you have access to more than one area, the symbol(s)corresponding to the area(s) for which you have access willilluminate in sequen

Digiplex 848/DigiplexNE LED Keypads 15nFire Zones cannot be bypassed. 5.9.1 BYPASS RECALLThe Bypass Recall feature enables you to bypass the same zon

16 User’s Manual2) Press the [Byp] key. Your keypad will emit a Confirmation Beep and the PRG action light will illuminate. The BYP action light will

Digiplex 848/DigiplexNE LED Keypads 17n6.0 DISARMINGWhen the system is disarmed, the system deactivates the zones sothe alarm will not be triggered if

18 User’s ManualIn case of a burglar alarm, leave the premises and callyour security company from a safe place.6.3 ALARM MEMORY DISPLAYYour system wil

Digiplex 848/DigiplexNE LED Keypads 19n7.0 ACCESS CODESAccess Codes are codes that will allow you and others to access thesystem. These codes can be p

20 User’s Manual7.2 USER ACCESS CODESYour keypad is compatible with both the Digiplex 848 and DigiplexNEsystem. On a Digiplex 848 system, this keypad

Digiplex 848/DigiplexNE LED Keypads 21nHow do I program a user access code?1) Enter your [System Master Code] or [Access Code] with Master feature.2)

22 User’s ManualIf your keypad emits a Rejection Beep, you may have chosen anexisting User Code or the Master Code used to modify or create thecode do

Digiplex 848/DigiplexNE LED Keypads 23nPress option ON/OFF Option Description[3] Duress FeatureOFF (default) Duress feature disabled.ON Duress feature

24 User’s Manual7.3 AREA ASSIGNMENTIn a partitioned system the system can be divided into distinctprotected areas. Programming access to a specific ar

Digiplex 848/DigiplexNE LED Keypads 25nTable 2: Area AssignmentIn Table 1 and Table 2 the User Code Option or Area isconsidered “ON” when the correspo

26 User’s Manual8.0 TROUBLE DISPLAYWhen your system experiences problems or is tampered with, theTRBL action light will illuminate. Most of the troubl

Digiplex 848/DigiplexNE LED Keypads 27n8.0.1 GROUP [1]: SYSTEMTrouble [1]: AC FailureThis means that your system is running on the backup battery. The

Digiplex 848/DigiplexNE LED Keypads 1nTABLE OF CONTENTSINTRODUCTION... 3BASIC OPERATION...

28 User’s Manualcleaned or a wireless device is no longer communicating with itsreceiver.8.0.5 GROUP [8]: CLOCK LOSS The time and date have been reset

Digiplex 848/DigiplexNE LED Keypads 29n9.0 ADDITIONAL FEATURES9.1 PROGRAMMABLE OUTPUTS (PGMS)Your system includes two or more programmable outputs (PG

30 User’s Manualfor two seconds, the system will generate an alarm. The alarm canbe programmed to be either silent or audible according to yourprefere

Digiplex 848/DigiplexNE LED Keypads 31n9.3.2 SETTING A CHIME ZONE TIME PERIODHow do I program all the keypad’s Chimed Zones to beep onlywhen they open

32 User’s Manual9.4 PROGRAMMING THE TIMEHow do I program the time?1) Enter your [Access Code].2) Press the [TRBL] key.3) Press the [8] key.4) Enter th

Digiplex 848/DigiplexNE LED Keypads 33n10.0 QUICK FUNCTION KEYSYou will only need to use the Quick Function keys upon your installeror security compan

34 User’s Manual11.0 FIRE AND BURGLAR ALARMS11.1 STANDARD FIRE ZONEDuring a fire alarm, the bell/siren will emit an intermittent sound(BEEP-BEEP-BEEP

Digiplex 848/DigiplexNE LED Keypads 35nFigure 2: Delayed Fire Zone

36 User’s ManualThe Fire Zone may reset itself once the smoke hascleared. If it does not, simultaneously press and holdthe [Clear] and [Enter] keys fo

Digiplex 848/DigiplexNE LED Keypads 37n11.4 MINIMIZING HOME FIRE HAZARDSHow can you avoid the four most common causes of fires at home?1) Never leave

2 User’s ManualACCESS CODES... 19System Master Code... 19U

38 User’s Manual12.0 TESTING AND MAINTENANCE12.1 BURGLAR ALARM TESTINGThis test requires two people. One person will watch the keypadwhile the other p

Digiplex 848/DigiplexNE LED Keypads 39nHow do I conduct the system test?1) Call the security company to advise them that you are testing the system.2)

40 User’s ManualWarrantyThe Seller warrants its products to be free from defects in materialsand workmanship under normal use for a period of one year

780 Industriel Blvd., Saint-Eustache (Quebec) J7R 5V3 CANADATel.: (450) 491-7444 Fax: (450) 491-2313www.paradox.c

Digiplex 848/DigiplexNE LED Keypads 3n1.0 INTRODUCTIONYour security system uses advanced technology which will provideyou with reliable security prote

4 User’s Manual2.0 BASIC OPERATIONThe system communicates by illuminating the “AC” light, the “Status”light and the various lights on the screen as sh

Digiplex 848/DigiplexNE LED Keypads 5n2.1 AUDITORY FEEDBACK (BEEP TONES)When you enter information on your keypad, it will guide you withbeep tones to

6 User’s Manual2.2.2 CONFIDENTIAL MODEThe installer can program your keypad not to display the status ofyour system by changing the keypad from Normal

Digiplex 848/DigiplexNE LED Keypads 7n3.0 PARTITIONED SYSTEMYour installer can set your keypad to recognize separate protectedareas. A separated syste